高性能混凝土耐火性能及对策探讨

高性能混凝土与传统混凝土相比,结构密实,脆性更大,渗透性低,尤其是在火灾高温状态下发生爆裂现象因而造成其抗火性差。为此,提出在高性能混凝土中混掺聚丙烯纤维和钢纤维、外加减水剂及骨料两种技术措施,以提高高性能混凝土的耐火性能。     

月壤参数对月面着陆气囊缓冲性能的影响

为研究月壤参数对气囊缓冲性能的影响,根据“嫦娥三号”的着陆工况设计了月面着陆气囊,并基于可压溃泡沫模型建立了考虑月壤特性的气囊缓冲动力学模型。对不同月壤下气囊的缓冲过程进行分析,发现月壤越软有效载荷冲击加速度越小,但气囊会陷入月壤中,不利于对外排气,影响其缓冲效果。因此,采用气囊峰值压力、有效载荷最大加速度和最大下落高度3个指标对气囊缓冲性能进行综合评价,定量研究了月壤参数的影响规律。结果表明:月壤密度、剪切模量及屈服参数a₀和a₁对缓冲性能的影响较大,且对前两个指标为正影响,对后一个指标为负影响。进一步研究发现,这4个月壤参数与3个缓冲性能指标之间〖BHDWG8,WK10YQ,DK1*2,WK1*2D〗〖XCZX.TIF;%129%129〗听语音 聊科研与作者互动 均为指数函数关系。     

节点实时性能自适应的集群资源分配算法

由于配置和所运行作业的不同,集群各节点的实时性能差异较大。为提高集群性能,提出节点实时性能自适应的集群资源分配算法 (node real-time performance adaptive cluster resource scheduling algorithm,NPARSA)。节点实时性能用其配置(CPU核数及速度、内存容量、磁盘容量)和实时状态参数(CPU、内存和磁盘的剩余数量及磁盘读写速度)表示。NPARSA根据作业类型自主选择节点性能评价指标的权值,实现节点实时性能对于作业类型的自适应。实时性能最优的节点分配给作业。虚拟机实验和物理集群实验表明,与Spark默认资源分配算法、没有考虑作业类型与节点匹配的算法、使用作业和节点匹配差异程度作为资源分配依据的算法相比,NPARSA能更有效地缩短作业执行时间、提高集群性能。     

Thermal hazard assessment of TKX-50-based melt-cast explosive

In the present study, thermal hazards of TNT and DNAN used as the molten binder in TKX-50-based melt-cast explosives were comparatively studied through accelerating rate calorimeter (ARC) and Cook-off experiments. Two kinds of ARC operation modes were performed to investigate the thermal safety performance under adiabatic conditions (HWS mode) and constant heating (CHR mode). The obtained results demonstrated that at both heating modes, DNAN/TKX-50 outperformed TNT/TKX-50 from the thermal safety point of view. However, the sensitivity to heat of the samples was reverse because of the different heating modes. In addition, the results of thermal hazard assessment obtained from the cook-off experiment complied with ARC analysis which indicated the molten binder TNT replaced by DNAN would reduce the hazard of the TKX-50 melt cast explosive. Furthermore, the results of cook-off experiments also showed that DNAN/TKX-50 outperformed TNT/TKX-50 from the aspect of thermal stability, which was consistent with the result of CHR mode because of the similar heating process.     

Analysis on damage characteristics and detonation performance of solid rocket engine charge subjected to jet

To further explore the damage characteristics and impact response of the shaped charge to the solid rocket engine (SRE) in storage or transportation, protective armor was designed and the shelled charges model (SCM)/SRE with protective armor impacting by shaped charge tests were conducted. Air overpressures at 5 locations and axial acceleration caused by the explosion were measured, and the experimental results were compared with two air overpressure curves of propellant detonation obtained by related scholars. Afterwards, the finite element software AUTODYN was used to simulate the SCM impacted process and SRE detonation results. The penetration process and the formation cause of damage were analyzed. The detonation performance of TNT, reference propellant, and the propellant used in this experiment was compared. The axial acceleration caused by the explosion was also analyzed. By comprehensive comparison, the energy released by the detonation of this propellant is larger, and the HMX or Al particles contained in this propellant are more than the reference propellant, with a TNT equivalent of 1.168–1.196. Finally, advanced protection armor suggestions were proposed based on the theory of woven fabric rubber composite armor (WFRCA).     

指挥控制通信与情报(C3I)系统的评价

综述了目前用于评价Ｃ３Ｉ系统的各类方法与过程,讨论了Ｃ３Ｉ系统的评价框架,并对这个框架下的各种评价方法与过程的长处和不足提出了作者的看法     

新疆双语教师专业化发展问题研究——基于绩效技术视角

本文通过对新疆喀什地区中小学双语教师专业化发展现状调查,运用绩效技术手段,找出当前中小学双语教师专业化发展中存在的主要问题及引发问题的根源,构建中小学双语教师专业化发展的绩效改进过程模型,并提出中小学双语教师专业化绩效改进建议。     

钢丝增强复合条带抗弹性能数值分析

为研究钢丝增强聚合物基复合条带的抗弹性能,基于冲击动力学理论分析其抗弹机理,再借助ANSYS/LS-DYNA软件和LS-PrePost前后处理器模拟有无增强钢丝2种工况下,条带对7.62 mm弹体的冲击响应。分析表明：条带的弹性模量、剪切模量和面密度会影响其能量吸收性能,能量吸收量随三者的增大而增大;由于聚合物基体的正交各向异性,应力云图显示出扁平椭圆状是合理的;在聚合物基复合条带中嵌入增强钢丝对条带整体的抗弹性能有积极的影响,但嵌入过量的钢丝会导致重量和成本的增加,因此需要对合理的钢丝配比率作进一步研究。研究结果可为钢丝增强聚合物基复合条带在野战防护结构中的应用提供参考。     

燃烧室-喷管流场数值解

本文用时间相关法计算了固体火箭发动机燃烧室─喷管亚跨声速流场数值解,控制方程用ＭａｃＣｏｒｍａｃｋ二步显格式：边界点参数用物理边界条件和参考平面上的特征方程计算。计算表明,达到收敛的数值积分步数比纯喷管的跨声速计算要多得多。虽然喷管壁上和轴线上的马赫数分布与纯喷管计算类似,但喷管中的等马赫线分布与纯喷管计算的结果［３］相差较远。     

多传感器量测融合算法的性能比较

归纳三类多传感器量测融合算法,即扩维滤波法、伪序贯滤波法和复合量测滤波法。采用协方差分析的方法比较各类算法的滤波精度,证明它们均能在各自给定的条件下实现线性最小均方意义上的最优滤波。仿真实例对各类算法的计算量和灵活性等性能进行比较,结果表明扩维型信息滤波器的计算量最小、灵活性最高,扩维型Kalman滤波器、伪序贯滤波器的计算量较大,而两种复合量测滤波器对各传感器的量测矩阵有一定要求,以致灵活性较差。所得结论对量测融合算法的实际应用具有一定的指导意义。